core material: CU

jacket material :PVC

This Product in accordance with the Chinese Standard GB / T 12706.1-2002 (equivalent to the International Electrotechnical Commission IEC60502-1: 1997) manufacturing. Products suitable for the laying of rated voltage (U0 / U) 0.6/1kV of Power lines for transmission of electrical energy used
The number of The Products Core: 1 ~ 5 cores, nominal cross-section: 1.5 ~ 630mm2
Long-term use of cables, conductors shall not exceed the maximum working temperature 70 , short circuit conductor cable 5 seconds were not allowed to exceed the temperature: 160 (S ≤ 300mm2) and 140 (S> 300mm2), S is the conductor nominal cross-sectional area. When laying ,the ambient temperature is not less than 0 . Cable minimum bend radius allows for separately were: 20D (single-core cable) and 15 D (multi-core cable), D is the cable outer diameter.
For the exchange of single-core cables, require selection of the non-sheathed or metal wire (including steel wire or non-magnetic metal wire) or non-magnetic metal strip armoured cable , at the same time does not permit laying in the magnetic pipe.
Note: Such as selection of  steel wire armoured single-core cable, and its carrying capacity, only the corresponding specifications of the non-armoured, or other non-magnetic metal armoured single-core cables of 60%.