Detailed Product Description

Power cable/XLPE Cable /0.6/1kv cable/Cu/XLPE/Armored cable/network cable

Conductor material: Copper , Al,or CCA

Insulation material:XLPE

Sheath Material:V70 PVC/PE

Application:building,house cable or other construction

CORE MATERIAL: CU / AL /CCA

Conductor Structure : 1~5 cores 

This product in accordance with the Chinese standard GB/T 12706.1-2002(equivalent to the International Electrotechnical Commission IEC60502-11997) manufacturing. Products suitable for the laying of rated voltage U0/U0.6/1kV of Power lines for transmission of electrical energy used.

The number of the products' core: 1~5 cores,nominal cross-section: 1.5~630sqmm
Cables for long-term use,conductors shall not exceed the maximum working  temperature 70,short circuit conductor cable 5 seconds were not allowed to exceed the temperature160S≤300sqmm and 140S300sqmm,S si the conductor nominal cross-sectional area. When laying, the  ambient temperature is not less than 0,Cable minimum bend radius allows for separately were 20Dsingle-core and 15 Dmulti-core,D is the cable outer diameter.

For the exchange of single-core cables,reqire selection of the non-armoured or metal wire including steel wire or non-magnetic metal wire or non-magnetic metal strip armoured cable,at the same time does not permit laying in the magnetic pipe.

Note: Such as selection of steel wire armoured single-core cable, and its carrying capacity, only the corresponding specificatins of the non-armoured, or other non-magnetic metal armoured single-core cable of 60%.